55
Web Browser Activation
Description, Specications, SSLoader + Software, and Operation Manual
Federal Signal www.fedsig.com
The Home page appears.
The Home page displays a summary of the current configuration settings for the
RTU. The Navigation Menu (blue hyperlinks on left) is used to access other System
Management web pages. Use the Help hyperlink to access the Help screen from any
web page.
Field Description
Model The RTU model of the device. This eld will be blank for a
few minutes following power up or master reset.
RTU Number The RTU’s assigned identity.
Description The text eld used to describe the RTU.
SmartMsg Server The RTU’s assigned default SmartMsg server.
SmartMsg Failover List The RTU’s SmartMsg Failover List. This eld will be blank
until the unit successfully connects to the server and
retrieves failover list.
MAC Address The MAC Address of the device.
IPv4 Addresses The RTU’s assigned IPV4 address or its domain name.
DIGI Firmware Version The rmware version of the DIGI Connect ME 9210 module.
RTU Firmware Version The rmware version of the RTU.
Up Time The elapsed time since power up or reboot.
6. Record the MAC and IP address to ensure the device can be managed in the future.
To Next Page
Loading...
Need help?
General
