Felt Bicycle - The Suspension Seat Post

64
The suspension seat post
Suspension seat posts (a) enhance the cyclist’s comfort when riding on uneven
ground. They can be used on roads as well as field tracks.
As a rule, suspension seat posts are designed for a cyclist of average weight, i.e.
75 kilograms. Their shock-absorbing properties can be altered either by adjusting
the initial spring tension and/or by exchanging the springs.
Let your FELT dealer do this job!
If you want to try it yourself, read the manual of the seat post manufacturer. Nor-
mally, the adjusting bolt is located inside the bottom end of the seat post. To
increase the initial tension, turn the bolt clockwise with an Allen key (b). Turn it
anticlockwise to reduce the tension, but not beyond the point where it is flush with
the seat post end.
Most seat post manufacturers include well-written manuals with their
deliveries. Read them carefully before changing any settings or doing any
maintenance work.
ii
Check and maintenance
To check the seat post for side-to-side play, take hold of the saddle at both ends
and try to move it from side to side (c).
If you notice any play, take it to your FELT dealer.
Manufacturers recommend servicing the seat post after about 60 operat-
ing hours. Ask your local FELT dealer to do this lubrication work.
ii
a b c