Felt Bicycle - Legal Requirements for Riding on Public Roads

84
Torques of add-on parts
Always follow the indicated values on the components (a). In case the torques
are not marked on the parts, start with the below mentioned approximate values
and increase the torque by half increments until you have reached the upper limit.
Never exceed the indicated maximum torque. If you are in doubt, ask your FELT
dealer for advice.
Seat posts
Block bolt 20-24Nm
Single-bolt patent seat post 20-24 Nm
Double-bolt patent seat post 12-15 Nm
Double-bolt seat post yoke principle 6-7 Nm
Stem
Road and triathlon bike printed on the component
Hybrid bike printed on the component
MTB printed on the component
Torques of frame parts
Rear shock fixing bolts printed on the component
Bearing fixing bolts printed on the component
Bottle mount bolts 3.9-4.5 Nm
Seat post clamp bolt 7-8.4 Nm
a
Legal requirements for riding on public
roads
FELT bikes are designed to be used on roads free of traffic as well as in open ter-
rain. If you want to use your bike for riding on public roads, it has to be equipped
according to the regulations of your country. Ask your FELT dealer to inform you
accordingly. Make yourself familiar with the road traffic regulations. Pay particular
attention to your bike being equipped with the prescribed lighting set and reflec-
tors (b).
b b