After performing of required changes please don’t forget click on „Save and
restart“.
Setup via DHCP - ON / OFF using DHCP assignment of IP adresses
IP adress, Network mask – IP adress setting, mask. In case of emergency
please contact your network administrator
Network gateway – Router IP adress (Internet connection)
DNS server 1 and 2 – IP adresses of primary and secondary domain server
NAT policy - there is the choice of what kind of translate IP addresses used
NAT address - used for network traffic through the router (modifies transcription
of the original or destination IP address)
STUN address - the IP address of the STUN server (see. page. 6)
To Next Page
Loading...
