A. Technical appendix
A-3
Festo P.BE-CTEU-EC-OP+MAINT-EN en 1208NH
A.1 Technical data
General
Degree of protection pro vided by housing
1)
according to IEC/E N 60529, completely moun-
ted, plug connector inserted or provided with
cover cap
IP65
Protection against electric shock
protection against direct and indirect c ontact as
per IEC/DIN 60204-1
through the use of PELV circuits
Electromagnetic compatibility (EMC)
2)
– Emitted interference
– Resistance to interference
See declaration of conformity
www.festo.com
Ambient temperature
1)
–Operation
– Storage/transport
–5 … +50 °C
–20…+70°C
Vibration and s hock
3)
tested as per IEC/EN 60068
–Vibration(part2-6)
– Shock ( part 2 - 27)
– Continuous shock (part 2 - 29)
Severity level (SL) for mounting on ...
Wall: SL 2, H-rail: SL 1
Wall: SL 2, H-rail: SL 1
Wall and H-rail: SG 1
Dimensions
–Width
–Length
–Height
40 mm
91 mm
50 mm
Weight (bus node without cable and substruc-
ture)
90 g
1)
Please note that connected devices may only satisfy a lower protection class, be suitable for a
smaller temperature range, etc.
2)
The device is intended for use in an industrial environment. Out side of industrial environments,
e.g. in commercial and mixed-residential areas, measures to suppress interference may be
required.
3)
Explanation of severity level following table “Explanation of vibration and shock – severity
level”
To Next Page
Loading...
