Festo CTEU-EC - Interfaces; Connection and Display Components

1. Installation
1-9
Festo P.BE-CTEU-EC-OP+MAINT-EN en 1208NH
1.4 Interfaces
1.4.1 Connection and display components
The followi ng electri cal connecti o n and display components
can be found on the bus node:
1
2
3
4
1 DILswitchgroup( section 1.4.5 )
2 Status L EDs:
bus status LEDs, CTEU-specific LEDs;
status indicator and diagnostics
( section 3.2)
3 Power supply connection for bus node and any connec-
ted devices, e.g. valve terminal;
M12, 5-pin, A-coded, pin plug connector
( section 1.4.2)
4 Fieldbus connections (fieldbus interfaces):
2x M12, 4-pin, socket plug connector, D-coded
( section 1.4.4)