3. Installation
3−34
Festo P.BE−MPA−EN en 0910d
Example of address assignment
Caution
Note that addresses may be shifted if the valve terminal is
extended at a later stage.
In the following example an M PA−S valve terminal type
MPA−MPM−PI with the folllowing components is addressed:
Component
MPA1 MPA2
Manifold blocks 2 (8 valve positions) 2 (4 valve positions)
Electronic
module
1 VMPA1−MPM−EMM−8
1 VMPA1−MPM−EMM−4
1 VMPA2−MPM−EMM−4
1 VMPA2−MPM−EMM−2
Tab.3/9: Example: Electronics module for multi−pin plug
connection
To Next Page