2. Fitting
2−4
Festo P.BE−MPA−EN en 0910d
2.1 General instructions on mounting and dismantling
Warning
Uncontrolled movements of the connected actuators and
loose tubing can cause injury to persons and/or damage
to property.
Before carrying out fitting, installation and maintenance
work, switch off the following:
compressed air supply
the operating and load voltage supplies.
Note
Handle all modules and components of the MPA−S valve
terminal with great care. Note especially the following:
compliance with the specified torques.
electrostatically sensitive devices.
Therefore, do not touch any contact surfaces.
To Next Page
Loading...
