5. Maintenance and conversion
5−12
Festo P.BE−MPA−EN en 0910d
Before mounting the electronics module
There are different designs of the electronics module
depending on the connection variant.
Electronics modules for the MPA−S valve terminal with CPX
terminal
Caution
Damage to components and functional damage
It is not permitted to supply MPA pneumatic modules that
are equipped with electronics modules and have a
common circuit via interlinking blocks of type
CPX−GE−EV−V... (valve supply) or 5−pin system supply
(typeCPX−GE−EV−S−7/8−5POL).
· If your MPA−S pneumatics are equipped with electronics
modules of type VMPA1−FB−EMS−... or
VMPA2−FB−EMS−..., you must supply the MPA−S
pneumatics exclusively via a four pin system supply
module of type CPX−GE−EV−S or CPX−GE−EV−S−7/8−4POL
of the CPX terminal.
Observe the overview in Tab.5/2.
To Next Page