RECOMMENDED MAINTENANCE OPERATIONS
INTERVAL MACHINE COMPONENTS PROCEDURE
DAILY; BEFORE A LONG PERIOD OF
INACTIVITY
Squeegee
Clean the vacuum chamber; the squeegee rubber blades; the vacuum nozzle
(see “CLEANING THE SQUEEGEE BODY”).
Debris hopper
Empty the debris hopper and clean inside (see “CLEANING THE DEBRIS
HOPPER (SWEEPING VERSION)”).
Brush head brushes
Clean the brushes on the brush head body (see “CLEANING THE BRUSH HEAD
BODY BRUSHES (SCRUBBING VERSION)”).
Clean the brushes on the brush head body (see “CLEANING THE BRUSH HEAD
BODY BRUSHES (SWEEPING VERSION)”).
Recovery tank
At the end of every working day, empty the recovery tank (see “EMPTYING THE
RECOVERY TANK”).
At the end of every working day, after having emptied the recovery tank, clean the
vacuum system lters (see “CLEANING THE RECOVERY TANK FILTERS”).
At the end of every working day, after having emptied the recovery tank, clean the
vacuum tube (see “CLEANING THE VACUUM TUBE”).
Solution tank
At the end of every working day, empty the solution tank (see “EMPTYING THE
SOLUTION TANK”).
WEEKLY
Machine water system
Clean the lter in the machine's water system (see “CLEANING THE WATER
SYSTEM FILTER”).
Squeegee rubber blades
Check that the rubber blades on the squeegee body are intact and inspect for
wear; if necessary, replace these (see “REPLACING THE SQUEEGEE BODY
RUBBER BLADES”).
Brush head brushes
Check that the brushes on the brush head body are intact and inspect for wear;
if necessary, replace these (see “REPLACING THE BRUSH HEAD BODY
BRUSHES (SCRUBBING VERSION)”.
Check that the brushes on the brush head body are intact and inspect for wear;
if necessary, replace these (see “REPLACING THE BRUSH HEAD BODY
BRUSHES (SWEEPING VERSION)”.
MONTHLY Squeegee rubber blade levelling
Check that the rubber blades on the squeegee body are level and if necessary,
adjust these (see “ADJUSTING THE SQUEEGEE BODY RUBBER BLADES”).
26
13
13
1
7
2 3 4 5 6
2
8
1 3
4
5 6
7
8
9
9 1210 11
10
11
12
11
14 15 16 17
15
16
18
17
14
18
19
19
20
20
21
To Next Page
Loading...
