EasyManua.ls Logo

Fimet F1 - 2.5.4 Ultrasonic Scaler Water Switch (optional); 2.6 Suction Head

Default Icon
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide • 19
Ultrasonic scaler power adjustment
2.5.4 Ultrasonic Scaler Water Switch (optional)
Warning!
The hot tip of the ultrasonic scaler may damage the patient's soft tissue and teeth.
The tip may also be damaged by heat. Always use cooling water in normal use.
The instrument bridge can be equipped with a scaler water control lever. This lever cuts
off the water from the ultrasonic scaler. This option is only used in special purposes.
2.6 Suction Head
Normally, the suction head holds the suction hose(s), evacuator tips and syringe or other
instruments. The instruments are easily reachable and in correct position ready for work-
ing. An instrument can be activated simply by picking it up from its holder.
Suction head
The suction head is connected either to the chair with swivel arms or to the cuspidor with
an extendable arm depending of the model. The swivel arms enable a wide movement
range of the suction head, which in turn enables wide variety of working positions. No ex-
tra weight is intended to be placed on the swivel arms.
Ultrasonic
scaler power
adjustment

Table of Contents

Other manuals for Fimet F1