8 • User Guide
2 Product Description and Operation
Dental Treatment System F1 is a system designed for use in many kinds of dental treat-
ments. This product can be used, for example, in dental clinics, dental receptions and for
dental surgeries. The product is intended to be used for dental treatment by dental care
professionals. The system may contain advanced tools or parts, the use of which may re-
quire additional training.
The F1 Dental Chair is a medical device designed to be used in dental, ENT, podiatry,
cosmetic, eye or other similar procedures. The product is intended for professional use
only. The product is not intended to be used in surgical operations other than dental.
Dental Treatment System F1 is designed to be used in immobile premises only. Using the
product in a moving vehicle is prohibited.
The F1 Dental Chair is designed for patients of normal physique. It may be used with all
kind of patients but the convenience of use may vary. The maximum weight of the patient
is limited to 135 kg. If the F1 Dental Chair is used as stand-alone (with no unit), the maxi-
mum allowed weight of the patient is 160 kg.
The F1 Dental Chair can be positioned with the help of electric motors to pre-set working,
entry, exit and spitting positions. The height of the seat and the tilt of the back rest can al-
so be set separately to the wanted position. The dental chair can be rotated around its
central point. The head rest is double articulated.
The instrument arm has five and the suction arm four degrees of freedom.
Pressurized air is mandatory for the instruments and to control some valves.
Water for the instruments and syringes can come either from the mains water or the clean
water bottle.
The dental system needs a sewage connection for the secretions.
The product requires regular service to ensure constant and safe operation.
This chapter describes the main parts of the System and its functions.
All devices inside the patient area (within 1.5 meters of the patient) must be IEC 60601-1
approved or equally deemed safe.
See section 4.9 for information about network connections.
Warning!
Connecting devices not compliant with IEC 60601-1 or IEC 60950 may cause an
electric shock hazard.
To Next Page
Loading...
