32 • User Guide
headrest in or out. Please note that the gap between the headrest and the backrest
should be at most 10 cm. The headrest may not be steady enough if elongated too much.
The locking lever locks the double articulated movements.
Headrest adjustments
The movements of the headrest are double-articulated. The headrest can be adjusted
around the two axels when the locking lever is in open position.
Double-articulated headrest movements
2.11.9 Legrest
The legrest can be extended (*) and the knee break angle can be adjusted. The legrest
moves synchronically with the backrest.
(*) Optional