finjan NG-8000 Installation And Setup Guide

Installation and Setup Guide
39
Chapter 4 - Configuring ICAP Clients
Figure 4-4: ICAP Protocol: Blue Coat Configuration
3.
In the Weights for ICAP Resource Allocation section, click Add. A drop-down
menu is displayed.
4. Select Blue Coat from the Type drop-down list.
5. Enter the IP address of the ICAP client, enter a weight of 100, and click Add.
6. In the ICAP Listening Port section, enter the IP address of the Scanning Server,
click Apply, and then click Commit Changes on the top right of the screen.
 To configure Blue Coat via the Blue Coat Web interface
1. Log in to the Blue Coat web interface.

finjan NG-8000 Specifications

General

Brand	finjan
Model	NG-8000
Category	Firewall
Language	English