finjan NG-8000 Installation And Setup Guide

Installation and Setup Guide
59
Chapter 5 - Advanced Settings
5. Repeat steps 3-4 to set System Time and match the Hardware Time to the System
Time, and then click Save.
6. For more accurate time checking you can synchronize your System Time settings
with an external Time Server. In the Timeserver hostnames or addresses field,
enter the required hostname or IP address.
7. Select the Set hardware time too checkbox to also synchronize the hardware time.
8. To synchronize to the Time Server settings randomly, select No in the
Synchronize on schedule section.
9. To synchronize on schedule, select Yes in the Synchronize on schedule section,
and select the required time schedule in the scheduling options below.
10.Click Sync and Apply. The screen refreshes with the scheduling configuration.
2.5 Network Settings
Clicking Network Settings in the Advance Settings screen, displays the Advanced
Network Settings screen.
NOTE: Synchronizing your time settings with an external Time Server is strongly
recommended, especially when working with distributed topologies.

finjan NG-8000 Specifications

General

Brand	finjan
Model	NG-8000
Category	Firewall
Language	English