Installation and Setup Guide
75
Chapter 5 - Advanced Settings
3. Click Shutdown System to shut down the system.
2.9 Active/Standby Policy Server
This screen displays the Policy Server’s status: Active or Standby. The High Availability
feature containing the Active or Standby Policy Servers must be initially enabled from the
Management Console in order for this screen to appear.
Figure 5-32: Active/Standby Policy Server
To restart the role of a Policy Server, whether as Active or Passive, you can click on the
Restart as button to force a restart of the Active/Standby Policy Server.
You can choose to switch the Policy Server from Active to Standby or vice versa by
clicking the Switch to button.
The IP address of the other Policy Server that you defined in the Management Console
(Settings
Devices
Policy Server
High Availability Policy Server
configuration) will be displayed here. It will be displayed either as the Standby Policy
Server Address or as the Active Policy Server Address depending on what the status is of
this Policy Server.
Click on the link to be redirected to the other Policy Server Setup Console (again – this will
be displayed as either active or standby – depending on the status).
For more information on this feature, please refer to the High Availability Policy Server
Technical Brief.
To Next Page
Loading...
Need help?
General
