finjan NG-8000 Installation And Setup Guide

Chapter 4 - Configuring ICAP Clients 35
C HAPTER
C ONFIGURING ICAP C LIENTS
This chapter describes the configuration of the following ICAP clients:
 Network Appliance NetCache Series (NetApp)
 Blue Coat
1 Network Appliance Netcache Series (NetApp)
 To configure NetApp via the NetApp web interface:
1. Log in to the NetApp Web interface. The ICAP Setup window is displayed with the
General tab open.
2. Click Setup.
3. Click ICAP  ICAP 1.0 in the left hand pane.
4. Select the Enable Version 1.0 option.

finjan NG-8000 Specifications

General

Brand	finjan
Model	NG-8000
Category	Firewall
Language	English