8
OPERATION AND MAINTENANCE
OF THE FINN BARK BLOWER
INTRODUCTION
The FINN Corporation would like to thank you for your latest FINN purchase. In our efforts to
maintain a quality and growing relationship with every customer, we would like to encourage you
to contact us for help with service, genuine replacement parts, or for any other information you
may require.
THE FINN BARK BLOWER AND ITS FUNCTIONS
The FINN Bark Blower is an apparatus for conveying and discharging bulk materials, such
as bark mulch, at a fast and uniform rate while utilizing a minimum amount of manpower. The
product to be used is generally composted and processed, then used as a soil amendment,
ground cover for erosion, weed control, or for decorative purposes on landscaping (bark mulch).
This manual is intended to provide step-by-step instructions on the operation, care, and
maintenance of the Bark Blower. In addition, it contains illustrations and a complete list of parts
and components for easy identification.
HOW THE BARK BLOWER WORKS
Bulk material is loaded into the hopper by a loader or by the feed chute. Located along the
bottom of the hopper is a drag chain conveyor that conveys the bulk material to an opening, in
the rear of the hopper, containing a feed roll. The feed roll and drag chain conveyor feed the
bulk material into the rotary air valve. The rotary air valve has been specifically designed and
built to handle tough, fibrous materials such as bulk mulch. The function of the rotary air valve
is to take the bulk material and convey into an enclosed chamber where it is then introduced
into the high volume / low pressure air stream. The air stream is created by the blower, which is
directly coupled to the engine and is channeled through the rotary air valve and then through the
discharge hose.
For best results and to ensure safe operation and long life of the
equipment, please read and follow all instructions carefully.
To Next Page
Loading...
