OPERATING INSTRUCTIONS 21
-
If it is not possible to mount the Multisensor Plus on the cei-
ling, an alternative is to install it on the wall. For wall moun-
ting, a consistent clearance of at least 50 cm around the
device and into the room is required.
≥ 100 cm
≥ 50 cm
≥ 50 cm
≥ 50 cm
≥ 50 cm
⅓ ⅓ ⅓
CAUTION
If a change in the installation location is necessary,
for example, due to changes in the furnishings or
structural modications, please contact the land-
lord or building management.
To Next Page
Loading...
