FireAngel Multisensor Plus - Cleaning; Demounting and Reassembly Instructions During Renovation; Demounting

16 MULTISENSOR PLUS
-
Cleaning
Never spray the device directly. If necessary, the surface
of the Multisensor Plus can be gently wiped with a slightly
damp, clean cloth to remove items like spider webs and lint.
Do not use cleaning agents, bleach, solvents, or polishes.
Demounting
1. To remove the Multisensor Plus, turn it counterclockwise
(to the left) by hand and pull it down from the mounting plate.
Try not to disassembly the mounting plate itself.
2. Store the Multisensor Plus in a dust-protected environ-
ment (e.g., in a bag).
The device may be dismantled or covered for up to 21 days
during renovation works. After this period, it will signal a fault.
Once the work is complete, please remount the Multisensor
Plus in its original location or remove the cover as soon as
possible.
Demounting and reassembly
instructions during renovation