FireClass FC506 - Page 22

Figure 5: Chassis mounting details
Callout Description
1 Mounting studs
2 Mounting slots
Figure 6: Cabinet dimension details
Note: All dimensions are in mm.
Callout Description
1 Mounting holes
Figure 7: FC500 repeater installation
Callout Description
1 Holes for cabinet mounting (four)
2 Screws to secure main module (four)
3 Connector for the repeater RS485
interface
4 Earthing cable
5 Terminal for the earth connection wires
6 LED label slot
7 User interface repeater board
8 Knockouts for cables ducted externally
(four)
(One on each side)
9 Hooks to secure the cover on the panel
(two)
10 Screws to secure cover (two)
11 Repeater panel cover
FC503 and FC506 Addressable Fire Control Panels22
Johnson Controls - CONFIDENTIAL