14
The OB76 models use a function module as a customer
interface, and shows the cooking function selected by
illuminating the icon on the control panel.
The module uses a harness to communicate with the
clock module, and has an encoder for the customer to
select the oven function.
The module also has an illuminated white halo around
the control knob.
4.12 Function Module
4.13 User Interface Harness
The temperature and function modules are linked to
the clock module via the user interface harness.
This harness uses knob encoders for the customer
interface for selecting the oven function or selecting
the oven temperature.
The power board is located in the top panel area, and
is held in place by plastic standoff clips.
The power board is connected to the clock via a
harness and controls the following components:
Elements
Door switch
Temperature sensor
Door lock
Lights
Cavity fan
Cooling fan
The power board is a GOEP type board. If being
changed for any reason, the model ID must be
selected for the product it is being fitted to.
4.14 Power Board
To Next Page
Loading...
