8
3 MODEL / SERIAL NUMBER LOCATION & IDENTIFICATION
The product data plate is located on the left hand side behind the grill, between the control panel and
the oven door (top oven on double models).
The data label contains information specific to that model, like product code number, model number
and serial number.
The product code is a dedicated number used to identify the model variants, e.g colour, markets,
features.
E.g. 80888 - A is a double stainless steel model built for the Australasian market.
The letter shown after the product code signifies the service version of the product. The service
version changes when new parts are introduced to the model which are not backwards compatible.
When ordering parts, it is very important to use the correct product code and service version. Each
product code / service version variation has a dedicated parts manual. For example, 80888-A may
comprise different parts to 80888-B.
3.1 Data Label and Location
Data label
To Next Page
Loading...
