Buzzer
Factory Setting Completed!
Restored to factory setting
Delete all data
in internal memory
Factory Reset
Update Extruder
3/4 Start OK
More details about Camera, please check Chapter 2.5.
Turn on or turn off the camera.
Move Camera
Filament Check Led
Move Camera
Filament Check Led
2/4
Move Camera
Filament Check Led
2/4
2/4
To turn on/off the filament
check, notice will pop out
when filament is used up
or suspended when the
check is turned on.
Filament check:
To turn on/off the light.
LED:
Camera:
20
To Next Page
Loading...
