Finder2.0 User Guide |
www.flashforge.com
Print it directly with your Finder2.0 or export to your USB Stick
View FlashPrint home screen from one of six viewing angles
Move model around on xy-plane; shift+click to move along z axis
Turn and rotate your model
Scale the size of your object
Cut model into several parts
You can load a model file or Gcode file into your Flashprint by the following six
methods:
Method 1: Click the Load icon on the main interface. Then select the object
file.
Method 2: Select the file for loading and drag the file to the main interface of the
software.
Method 3: Click [File]--[Load File]. Then select the object file for loading.
Method 4: Click [File]--[Examples] to load the example files
Method 5: Click [File]--[Recent Files] to load the files opened recently.
Method 6: Select and drag the target file to the icon of Flashprint.
Note: .STL, .OBJ, and .FPP, ways to store 3D models, are supported by Flashprint
for editing.
Generating Rilievo
To Next Page
Loading...
