Flashforge Hunter - Page 10

Hunter User Guide | www.FlashForge.com 400-699-1063
10
E.g. www. thingiverse.com
1.1.2 Slice and Export the 3D Model
Slice software is the software that prepares 3D models for printing and turns them into
instructions for the 3D printers. FlashPrint is the slicing software used for the
FlashForge Hunter.
Using FlashPrint, you can prepare files to be SVGX files for printing. Then the files
can be transferred to your Hunter via USB cable, USB stick or Wi-Fi.