Flashforge Hunter - Page 52

Hunter User Guide | www.FlashForge.com 400-699-1063
52
(6-7) Pour the absolute alcohol into rinse bucket halfway, immerse the build plate
and model into rinse bucket and rinse it with brush.
6-7
After finished washing, put the platform on the workbench and remove the model
with metal scraper, shown as follow.
Attention: As the sharp metal scraper, please remove the model with care.
6-8
Notice: Do not pour the used resin back to the photopolymer resin bottle.
Do not pour the used resin into domestic sewage.