Inventor User Guide | www.flashforge.com 0086‐ 0579‐82273989
39
6-10
6.2.10 Supports
After loading the model, click [Edit]--[Supports] or click the Supports icon
directly, then you will enter the support edit mode(6-11). Click [Back] to exit when
you finish editing.
6-11
①
Support Options
Click the Support Options, an option box will appear, supports options include
“treelike”and “linear”, when choose “treelike”, click [OK], then the support generated
will be treelike structure; when choose “linear”, click [OK], then the support
generated will be linear structure; if the model already had support, when you choose
To Next Page
Loading...
