Clean the blade with the dust-free cloth in alcohol.
Clean the planarizer from the back lower side of the printhead
carriage with the dust-free cloth in alcohol.
Clean the planarizer and its blade
Wear rubber gloves and sprinkle with a little alcohol on a
dust-free cloth.
Release the hook on the both sides of the rear fan.
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43
44 45
46 47 48 49 50 51
52 53 54
55 56 57 58 59 60 61
62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77
78 79 80 81 82 83 84 85
86 87 88 89 90 91 92 93
94 95 96 97 98 99 100 101
102 103
To Next Page
Loading...
