EasyManua.ls Logo

FLENDER N-EUPEX - N-EUPEX Flexible Elements (12); A.5.2 N-EUPEX Flexible Elements (12)

FLENDER N-EUPEX
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.5.2 N-EUPEX flexible elements (12)
Table A-8 N‑EUPEX flexible elements
Material Hardness Comment Marking Ambient tempera‐
ture
Approved for
explosion group
NBR 80 Shore A Standard Black flexible elements
with
blue stripe
-30 °C to +80 °C IIA, IIB, IIC
NBR 65 Shore A Special, soft,
shifting of the
resonant speed,
rated torque
reduced
Black flexible elements
with
green stripe
-30 °C to +80 °C IIA, IIB, IIC
NBR 90 Shore A Special, hard,
shifting of the
resonant speed
Black flexible elements
with
magenta stripe
-30 °C to +80 °C IIA, IIB, IIC
NBR 80 Shore A Special,
increased (low-backlash)
Black flexible elements
with
yellow stripe
-30 °C to +80 °C IIA, IIB, IIC
NBR 65 Shore A Special,
increased (low-backlash)
shifting of the
resonant speed,
rated torque
reduced
Black flexible elements
with
white stripe
-30 °C to +80 °C IIA, IIB, IIC
NR 80 Shore A Special,
low-temperature use
Black flexible elements
with
orange
stripe
-50 °C to +50 °C IIA, IIB, IIC
HNBR 80 Shore A Special,
high-temperature use
Black flexible elements
with
red stripe
-10 °C to +100 °C Not approved
NBR 80 Shore A Special,
electrically insulating
Green flexible ele‐
ments
-30 °C to +80 °C IIA, IIB
Technical data
A.5 Flexible elements (12)
N-EUPEX / N-EUPEX DS 3100en
Operating Instructions 10/2017 65

Table of Contents

Other manuals for FLENDER N-EUPEX