FOM16 Installation Description
FOM16-V2.0-20021114
-31-
6.5.7 Clear previous 15 minutes PM Menu
PATH: PMÆC_P15
1. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the module.
2. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the channel.
3. Use the ◄ key and ► key to cycle through to a proper item and press the Enter key to
select the previous item.
4. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the PM items which are Near CV, Near ES, Near SES, Near UAS, Far CV, Far SE,
Far SES, Far UAS.
5. When completed, the button line shows “ -- -- OK -- -- “ message.
6.5.8 Clear previous 1 day PM Menu
PATH: PMÆC_P1D
The operation step is the same as PATH:PM->C_P15
C_P15 C_P1D >
Clr Previous 15Min
LS OPT
Low-Speed
1 2 3 4 5 6 >
Channel 3
NCV NES FCV FES
-- -- OK -- --
NCV NES FCV FES
Near CV
1 2 3 4 5 6 7 8 >
Previous 3
To Next Page
Loading...