FlexGain FOM16 - Clear All PM Menu; Test Utility Menu; 1 Test LED

FOM16 Installation Description
FOM16-V2.0-20021114
-32-
6.5.9 Clear all PM Menu
PATH: PMÆC_ALL
1. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the module.
2. When the command is failed, the bottom line shows “ -- FAIL -- “ message.
3. When completed, the button line shows “ -- -- OK -- -- “ message.
6.6 Test Utility Menu
The test utility group includes LED. Pressing the Enter key to select the underlined item.
6.7.1Test LED
PATH: TEST->LED
1. Use the ◄ key and ► key to cycle through to a proper item and press the Enter key to
select the option.
C_ALL <
Clr ALL PM
C_ALL <
-- -- OK -- --
C_ALL <
-- -- FAIL -- --
LED TRANS
Test LED
LED
Test LED