FlexGain FOM16 - Configure Menu; Line Service Setting Menu

FOM16 Installation Description
FOM16-V2.0-20021114
-12-
The main menu is shown in Fig.13. It is the first menu display after power up.
Fig.13 Main menu
The first tier menu includes LOCAL and REMOTE. Each sub-menu is further broken down
into sub-level menu. Subsequent chapters give detailed information regarding these menus.
6.2 Configure Menu
The configure group includes SVC, CODE, EQU, ADDRESS, RESET, LPBK, RLSLPBK,
and PROTSW. Use the ◄ and the ►keys to cycle through to a proper item and pressing the
Enter key to select the underlined item.
6.2.1 Line Service Setting Menu
PATH: CONFIGUREÆSVCÆLS
1. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
elect the module.
2. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the channel.
LOCAL REMOTE
LOCAL NE
CONFIGURE STATUS >
-- -- TOP -- --
ALARM PM TEST <
Get Alarm
SVC CODE EQU >
Set-Service
ADDRESS RESET >
Set-Address
SVC CODE EQU
>
LS OPT
Low-Speed
LPBK RLSLPBK PROTSW <
Set-LPBK