FlexGain FOM16 - Page 17

FOM16 Installation Description
FOM16-V2.0-20021114
-13-
3. Use ◄ and ►key to cycle through to a proper service status and press Enter to select.
4. When completed, the button line shows “ -- -- OK -- -- “ message.
PATH: CONFIGUREÆSVCÆOPT
1. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the module.
2. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the channel.
3. Use ◄ and ► key to cycle through to a proper service status and press Enter to select.
4. When completed, the button line shows “ -- -- OK -- -- “ message.
IS OOS
In Service
IS OOS
Out Of Service
IS OOS
In Service
IS OOS
Out Of Service
ALL 1 2 3 4 5 6
>
SVC CODE EQU
>
LS OPT
Optical
WORK PROT
Work(Line1)
IS OOS
-- -- OK -- --
IS OOS
-- -- OK -- --