FlexGain FOM16 - Line Coding Setting Menu

FOM16 Installation Description
FOM16-V2.0-20021114
-14-
6.2.2 Line Coding Setting Menu
PATH: CONFIGUREÆCODE
1. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the module.
2. Use the ◄ key and ► key to cycle through to a proper channel and press the Enter key to
select the channel.
3. Use ◄ and ► key to cycle through to a proper coding type and press Enter to select.
4. When completed , the bottom line shows “ -- -- OK -- -- “ message.
HDB3(E1) | B8ZS(T1) >
HDB3 | B8ZS Code
AMI <
AMI Code
SVC CODE EQU TYPE >
Set-Code
ALL 1 2 3 4 5 6
>
AMI
-- -- OK -- --