Flexim FLUXUS G800 User Manual

FLUXUS G80x A Menu Structure
150 UMFLUXUS_G8V4-6-1EN, 2018-10-10
confirmation that the changes are to be saved
This display will only be indicated if a new fluid has been entered or the pa-
rameters of an existing fluid have been changed.
input of the compressibility coefficient of the gas
input of the compressibility coefficient of the gas
program code
selection of the displays for the input of a program code
defining a program code
input of the break code (= program code)
input of the access code (= the first three digits of the program code)
After the input of HotCode 071001
input of the lower limit of the inner pipe diameter for the displayed transducer
type
range: 3...63 mm
x
INIT-resis-
tant
Save changes
no >YES<
GASFACTOR
0.0
GASFACTOR
0.0
Special Funct. ↕
set program code
set program code
------
INPUT BREAK_CODE
CODE: 000000
INP. ACCESS CODE
CODE: 000000
DNmin Q-Sensor
15 mm

Flexim FLUXUS G800 Specifications

General

Brand	Flexim
Model	FLUXUS G800
Category	Measuring Instruments
Language	English