FLUXUS G80x 8 Mounting of the Transducers
64 UMFLUXUS_G8V4-6-1EN, 2018-10-10
• Put the rail on the tension strap clamps (see Fig. 8.43).
• Fix the rail to the tension strap clamps with the screws.
• Tighten the screws.
Fig. 8.40: Tension strap with the metal spring, the ratchet clasp and the tension strap clamp on the pipe
Fig. 8.41: Ratchet clasp with tension strap
Fig. 8.42: Ratchet clasp with tension strap
Note! To release the screw and the tension strap, press the lever down (see Fig. 8.42).
Fig. 8.43: Rail on the pipe
tension strap clamp
metal spring
ratchet clasp
lever
sense of rotation
cut
screw of
the clasp
To Next Page
Loading...
