Flintec FT-112 - Page 53

FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 52 of 170
[
19-
PROFIBUS
]
PROFIBUS CONFIGURATION (Only FT-112(D) PB)
Press key or key again to enter this menu.
Press key to return to beginning of the sub-block or press
key to enter the next main-block.
[
191
FORMAT
:
INTG
]
Data format of the Profibus
INTG
FLOA
:
:
Signed 32-bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
ADDRESS
:
001
]
Node address
001…125
[
19-
PROFINET
]
PROFINET CONFIGURATION (Only FT-112(D) PN )
Press key or key again to enter this menu.
Press key to return to beginning of the sub-block or press
key to enter the next main-block.
[
191
FORMAT
:
INTG
]
Data format of the Profinet
INTG
FLOA
:
:
Signed 32-bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
IP
:
250
]
IP address of Ethernet port.
Default is 192.168.16.250
[
194
SUB MASK
:
000
]
Subnet mask address of Ethernet port.
Default is 255.255.255.000
[
195
GATEWAY
:
253
]
Gateway address.
Default is 192.168.16.253
[
196
S. NAME
:
SCAL
]
Station (device) name.
Default is SCALE-1
[
19A
MAC ADR
:
]
MAC address
AA:BB:CC:DD:EE:FF
[
19-
CANOPEN
]
CANOPEN CONFIGURATION (Only FT-112(D) Panel CO)
Press key or key again to enter this menu.
Press key to return to beginning of the sub-block or press
key to enter the next main-block.
[
191
FORMAT
:
INTG
]
Data format of the CANopen
INTG
FLOA
:
:
Signed 32-bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
ADDRESS
:
001
]
Node address
001…127