Flintec FT-112 - Page 55

FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 54 of 170
[
19-
CC-LINK IE
]
CC-LINK IE CONFIGURATION (Only FT-112(D) Panel IE)
Press key or key again to enter this menu.
Press key to return to beginning of the sub-block or press
key to enter the next main-block.
[
191
FORMAT
:
INTG
]
Data format of the CC-Link IE Field.
INTG
FLOA
:
:
Signed 32 bit integer, no decimal point implied.
32 bit float, decimal point implied.
[
192
STATION
:
001
]
Station number.
001…120
[
193
NETWORK
:
001
]
Network number.
001…239
[ 2-- CONFIGURATIO ] Configuration Block
[
2--
CONFIGURATIO
]
CONFIGURATION MAIN BLOCK
Press key sequentially to access this main block,
or press key or key to enter configuration parameters,
or press key to enter the next block,
or press key to exit from programming.
[
21-
DSPLY ACUSTI
]
DISPLAY AND ACOUSTIC
Press key or key again to enter this menu.
Or press key to enter the next sub-block.
[
211
LIGHT
:
ON
]
Backlight
OFF
ON
AUTO
:
:
:
Backlight disabled.
Always bright.
Automatic backlight to increase the battery life.
[
212
COLOR
:
TURQ
]
Backlight color at basic weighing
WHIT
LGRE
GREE
TURQ
BLUE
:
:
:
:
:
White
Light Green
Green
Turquoise
Blue
YELL
AMBE
RED
:
:
:
Yellow
Amber
Red
[
213
KEYSOUN
:
YES
]
Key sound
NO
YES
:
:
Disable
Enable
[
214
REFRESH
:
5
]
Display refresh rate
X
:
1...9 times/sec
[
22-
INFO DISPLAY
]
INFORMATION DISPLAY
Press key or key again to enter this menu.
Or press key to enter to the next sub-block.
[
221
TIME
:
D+T
]
Information data on the right of the alphanumeric display.
NO
T
D
D+T
:
:
:
:
No clock data on the display.
Display time,
Display date,
Display date and time,