FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 91 of 170
Totalization
FT-112(D) Panel can be used for horizontal or vertical totalization operations. Vertical totalization means
individual and cumulative weighing of the different materials batched in the same container. The horizontal
totalization is used for weighing materials of batch in the separate containers or for totalizing sequential
weighing. A preset tare value can be used in totalization.
Totalization weighing is limited with 99 items. Refer to page 58.
You can follow the weighted items by pressing or keys at total value displaying.
Horizontal totalization
APPLICATION: To accumulate the sequential weighing. Refer to parameter 324.
1. Press to the key for zeroing the empty scale before
loading it.
2. Load the container on to the pan.
3. Press key for weighing material in net.
4. Add the material into the container.
5. Press key for totalizing and unload the container.
6. Load the following container on to the pan.
7. Repeat the procedure from item 3 to weigh following
materials.
8. Press key to display the total value as
[ C 5 MR: 5.003 KG ].
9. Press key for printout totalization ticket or press key
to go on totalization from item 3.
Delete the total
1. Press key to display the total value.
2. Press key second time when the total displays.
3. Press key and [ Delete ? ] prompt appears.
4. Press key to delete total and item weights or press
key to exit without delete the total.
To Next Page
Loading...