Click Apply. The times for the schedule are displayed in orange in the Arming Schedule Setting
section of the Defocus screen.
Figure 70: Updated Arming Schedule Setting Section
Note:
You can record up to three clips per day.
You must separate the hours and minutes with a colon, i.e. 02:00
6.3.1.5.2 Alarm (CM-3102-11-I)
Available only on the CM-3102-11-I, the Events Source > Alarm screen is used for enabling an alarm
when an event occurs and for defining actions when an alarm occurs.
Figure 71: Events Source > Alarm Screen
To enable an alarm
Select the Enable checkbox.
To select the type of alarm
From the Type drop-down list, select Normally Open or Normally Closed.
To Next Page
Loading...
