To define the method to store a snapshot
See instructions in section 6.3.1.5.1.
To record the event on the camera
See instructions in section 6.3.1.5.1
To enable sending an email notification
See instructions in section 6.3.1.5.1.
To define OSD text
See instructions in section 6.3.1.5.1.
To set the arming schedule
See instructions in section 6.3.1.5.1.
6.3.1.5.3 Audio (CM-3102-11-I)
Available only on the CM-3102-11-I, the Events Source > Audio screen is used for setting the audio
threshold level, which creates an audio event when the Sound Intensity Threshold is exceeded, and for
storing events and sending alerts. In order to use this function, audio must be enabled from the
System > Basic Configuration > Audio screen.
Figure 72: Events Source > Audio Screen
To Next Page
Loading...
