FLIR Ariel CM-3102 - Page 74

Accessing the CM-3102 via a Web Browser
66
Ariel CM-3102 User and Installation Guide
December 12, 2018
To set the arming schedule
See instructions in section 6.3.1.5.1.
6.3.1.5.5 Network
The Events Source > Network screen is used for enabling notification in case the network connection is
lost or if there is another device that is using the same IP on the network as the camera.
Figure 75: Events Source > Network Screen
To enable notification if the network connection is lost
In the Lost Network Connections section, select Enable. By default, Enable is not checked.
Click Save.
To start recording if the network connection is lost
In the Recording section, select the Record on Edge checkbox. By default, it is not checked.
Click Save.
To activate the on-screen display if the network connection is lost
In the OSD section, select Enable. By default, Enable is not checked.
In the Text text box, enter the text to display in the on-screen display.
Click Save.
To enable notification in case of a network conflict
In the Network Conflict section, select Enable. By default, Enable is not checked.
Click Save.
To start recording in case of a network conflict
In the Recording section, select the checkbox. By default, it is not checked.
Click Save.
To activate the on-screen display in case of a network conflict
In the OSD section, select Enable. By default, Enable is not checked.
In the Text text box, enter the text to display in the on-screen display.
Click Save.