Technical data22
22.7 FLIR GF300 24° Fixed lens
P/N: 44402-0202
Rev.: 45202
General description
The FLIR GF300 is an infrared camera for optical gas imaging (OGI) that visualizes and pinpoints leaks
of methane and other volatile organic compounds (VOCs), without the need to shut down the operation.
The portable camera also greatly improves operator safety, by detecting emissions at a safe distance,
and helps to protect the environment by tracing leaks of environmentally harmful gases.
The FLIR GF300 is used in industrial settings such as oil refineries, natural gas processing plants, off-
shore platforms, chemical/petrochemical industries, and biogas and power generation plants.
Benefits:
• Improved efficiency: The FLIR GF300 reduces revenue loss by pinpointing even small gas leaks
quickly and efficiently, and from a distance. It also reduces the inspection time by allowing a broad
area to be scanned rapidly and without the need to interrupt the industrial process.
• Increased worker safety: OGI allows gas leaks to be detected in a non-contact mode and from a safe
distance. This reduces the risk of the user being exposed to invisible and potentially harmful or explo-
sive chemicals. With a FLIR GF300 gas imaging camera it is easy to scan areas of interest that are dif-
ficult to reach with conventional methods. The camera is ergonomically designed, with a bright LCD
and tiltable viewfinder, which facilitates its use over a full working day.
• Protecting the environment: Several VOCs are dangerous to human health or cause harm to the envi-
ronment, and are usually governed by regulations. Even small leaks can be detected and documented
using the FLIR GF300 camera.
Detects the following gases: benzene, ethanol, ethylbenzene, heptane, hexane, isoprene, methanol,
MEK, MIBK, octane, pentane, 1-pentene, toluene, xylene, butane, ethane, methane, propane, ethylene,
propylene.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD <15 mK @ +30°C (+86°F)
Field of view (FOV)
24° × 18°
Minimum focus distance 0.3 m (1.0 ft.)
Focal length 23 mm (0.89 in.)
Lens identification Automatic
F-number 1.5
Focus Automatic (one touch) or manual (electric or on the
lens)
Zoom 1–8× continuous, digital zoom
Digital image enhancement
Noise reduction filter, high sensitivity mode (HSM)
Detector data
Detector type
Focal plane array (FPA), cooled InSb
Spectral range
3.2–3.4 µm
Detector pitch 30 µm
Sensor cooling Stirling Microcooler (FLIR MC-3)
Detects following gases Benzene, Ethanol, Ethylbenzene, Heptane, Hex-
ane, Isoprene, Methanol, MEK, MIBK, Octane,
Pentane, 1-Pentene, Toluene, Xylene, Butane,
Ethane, Methane, Propane, Ethylene, Propylene
#T559157; r. AH/45951/45951; en-US
90
To Next Page
Loading...
Need help?
General
