FLIR GF3 Series User Manual

Handling the camera16
16.3 Turning on the camera
16.3.1 Procedure
To turn on the camera, push and release the
button.
Note When you turn on the camera, a mechanical cooler will begin cooling down the in-
frared detector. The cooler has a sound that resembles a subdued motor. This sound is
normal. The cooling procedure will typically take 7 minutes for FLIR GF300, FLIR GF309,
FLIR GF320, and 10 minutes for FLIR GF306. In high ambient temperatures the cooling
times may increase 30% or more.
16.4 Turning off the camera
16.4.1 Procedure
To turn off the camera, push and hold the
button for more than 0.2 seconds.
16.5 Adjusting the viewing angle of the
viewfinder
16.5.1 General
To make your working position as comfortable as possible, you can adjust the viewing an-
gle of the viewfinder.
16.5.2 Figure
16.5.3 Procedure
To adjust the viewfinder, tilt the viewfinder up or down.
#T559157; r. AH/45951/45951; en-US
49

FLIR GF3 Series Specifications

General

Brand	FLIR
Model	GF3 Series
Category	Thermal cameras
Language	English