FLIR M364C - Mounting the Camera

•Choosealocationasclosetothevessel’scenterlineaspossible.Thisprovidesa
symmetricalviewwhenlookingforwardoraft.
•Selectalocationforthecamerathatisatleast1m(39.4in.)fromanymagneticcompass.
•Selectalocationthatisatleast1m(3ft)fromdevicesthatmaycauseinterference,such
asmotors,generatorsandradiotransmitters/receivers.
•IfinstallinganoptionalJCU,selectalocationfortheJCUthatisatleast1m(39.4
in.)fromanymagneticcompass.
Note:Ifyouwanttomakecableconnectionstothecamerabeforemountingittoyour
vessel(forexample,totestthecamera),rstattachthethreethreadedstudstothebase
(seep.32—Mountingthecamera).Thiswillhelptoprotectthecableconnectorson
thebaseofthecamera,andalsoprovidesastableplatform,helpingtopreventdamage
causedbytheunitrollingofftheedgeoftheworksurface.
Mountingthecamera
Usetheseinstructionstomountthecameraunitinposition.
32