FLIR M364C User Manual

ConnectorConnectstoSuitablecables
1)Power/NMEA0183/
Compositevideo
Note:TheNMEA0183
wiresarenotcurrently
active,andwillbe
supportedinafuture
softwareupdate.
•12/24Vdcpowersupply
•NMEA0183in/out
•Compositevideo(onfemale
BNCconnector)
•Right-angledpowersupply
cable(supplied)
2)RayNet
•RayNetnetworkdevice•RayNet-to-RJ45adapter
cable(supplied)
•Right-angledRayNet-to-
RayNetcable(supplied)
3)DeviceNet
Note:TheDeviceNet
connectorisnotcurrently
active,andwillbe
supportedinafuture
softwareupdate.
•DeviceNetnetworkdevice/
backbone
•SeaT alkngnetworkdevice/
backbone
•DeviceNet-to-DeviceNet
cable
•DeviceNet-to-SeaT alkng
adaptercable
4)HDSDI•HD-SDIdigitalvideo
device,orHDMIvia
suitableconverterand
cables,availableseparately
fromthird-partyretailers.
•HD-SDIvideocable
(supplied),terminatedin
BNCconnectors.
FormoreinformationonavailablecablesrefertoChapter12SparesandAccessories
Note:Thecablesshouldberoutedtoadryareaofthevesselforconnection.Alternatively
youmustensurethatallconnectionsarewatertight.
Note:Ifyouwanttomakecableconnectionstothecamerabeforemountingittoyour
vessel(forexample,totestthecamera),rstattachthe3threadedstudstothebase.
Thiswillhelptoprotectthecableconnectorsonthebaseofthecamera,andalso
providesastableplatform,helpingtopreventdamagecausedbytheunitrollingoffthe
edgeoftheworksurface.
Connectingcables
Followthestepsbelowtoconnectthecable(s)toyourproduct.
1.Ensurethatthevessel'spowersupplyisswitchedoff.
2.Ensurethatthedevicebeingconnectedhasbeeninstalledinaccordancewiththe
installationinstructionssuppliedwiththatdevice.
3.Ensuringcorrectorientation,pushcableconnectorsfullyontothecorrespondingconnectors.
4.Ifapplicable,engageanylockingmechanismtoensureasecureconnection.
5.Ensureanybareendedwireconnectionsaresuitablyinsulatedtopreventcorrosion
duetowateringress.
46

FLIR M364C Specifications

General

Resolution	640 x 512
Field of View	24° x 18°
Thermal Sensitivity	<50 mK
Pan/Tilt	360° continuous pan, +/- 90° tilt
IP Rating	IP66
Sensor Type	Uncooled VOx Microbolometer
Frame Rate	30 Hz
Spectral Range	7.5 - 13.5 µm
Power Requirements	12-24 VDC
Focus	Automatic
Operating Temperature	-25°C to +55°C