FLIR M100 Series User Manual

104 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

M100 / M200 SERIES

© 2017 Raymarine UK Limited

71001-2Document number:

03-2017Date:

English (en-US)

INSTALLATION & OPERATION INSTRUCTIONS

Table of Contents

Other manuals for FLIR M100 Series

Quick Start Guide5 pages

Questions and Answers:

W
Wendy OlsonAug 12, 2025
How to fix a FLIR Thermal camera when video is not displayed?
- J
  joanna45Aug 12, 2025
  If your FLIR Thermal camera isn't showing video, there are a few things to check: * First, the camera might be in Standby mode. You'll need to use the camera controls (either the thermal camera application or JCU) to wake it up. * Second, inspect the thermal camera network cables (RayNet or Ethernet) to ensure they are securely connected. * Third, verify that the power connections to the camera and JCU / PoE injector (if used) are properly connected, the power switch/breaker is on, and the fuse/breaker is in the correct state.
J
justinbrowningAug 19, 2025
What to do if FLIR Thermal camera controls are erratic or unresponsive?
- C
  Christina SpencerAug 19, 2025
  If your FLIR Thermal camera controls are acting erratically or not responding, here's what you can do: 1. Check that the controller and thermal camera are correctly connected to the network, either directly or through a Raymarine network switch. 2. Examine the Raymarine network switch status. 3. Ensure that SeaTalkhs / RayNet cables are free from damage. 4. Make sure that only one controller is in use at a time to avoid control conflicts. 5. Verify the power and network cabling to the controller and PoE injector (if a Joystick Control Unit is used). 6. Test other controllers, if available, to rule out a fundamental camera fault.
B
Brandy Friedman DVMAug 27, 2025
Why is my FLIR Thermal camera image too dark or too light?
- M
  Michael JordanAug 27, 2025
  If the image from your FLIR Thermal camera appears too dark or too light, try these adjustments: * First, adjust the display brightness using the controls on the display. * Second, the Scene Mode might not be suitable for the current conditions. A different Scene Mode setting may be better for certain environments. Use the SCENE button to change the mode; for example, a very cold background (such as the sky) could cause the camera to use a wider temperature range than appropriate.
T
Timothy FlynnSep 3, 2025
What to do if FLIR Thermal camera image is inverted?
- L
  lanejoeSep 3, 2025
  If the image from your FLIR Thermal camera is upside down, ensure that the Ball down setting is set correctly.

FLIR M100 Series Specifications

General

Brand	FLIR
Model	M100 Series
Category	Thermal cameras
Language	English

Related product manuals

Preview: FLIR M100SERIES

FLIR M100SERIES

Preview: FLIR M400

Preview: FLIR M300 Series

FLIR M300 Series

Preview: FLIR K2

Preview: FLIR ONE

Preview: FLIR Scout

Preview: FLIR Duo Pro R