FLIR M100 Series - Connections Overview; Connecting Cables

4.2Connectionsoverview
1.Poweranddrain
2.RayNetconnectionto:
a.RayNetconnectoronRaymarinenetworkswitchorLightHouse™-powered
Raymarinemultifunctiondisplay(usingRayNet-to-RayNetcable),OR
b.RJ45connectoronthird-partynetworkswitch,PC/laptopcomputer,orIPvideo
decoder(availableseparately),usingthesuppliedRayNet-to-RJ45adaptercable.
Note:Thesuppliedright-angledRayNetandPowercablesaresuitableformountingon
surfacesupto25.4mm(1.0inch)thick.Whenmountingonthickersurfaces,youmay
needtouseRayNetandPowercableswithstraightconnectors(availableseparately).
Note:Thecablesshouldberoutedtoadryareaofthevesselforconnection.
Alternativelyyoumustensurethatallconnectionsarewatertight.
Note:Ifyouwanttomakecableconnectionstothecamerabeforemountingitto
yourvessel(forexample,totestthecamera),rstattachthethreethreadedstudsto
thebase(seeMountingthecamera).Thiswillhelptoprotectthecableconnectors
onthebaseofthecamera,andalsoprovidesastableplatform,helpingtoprevent
damagecausedbytheunitrollingofftheedgeoftheworksurface.
Connectingcables
Followthestepsbelowtoconnectthecable(s)toyourproduct.
1.Ensurethatthevessel'spowersupplyisswitchedoff.
2.Ensurethatthedevicebeingconnectedhasbeeninstalledinaccordancewiththe
installationinstructionssuppliedwiththatdevice.
3.Ensuringcorrectorientation,pushcableconnectorsfullyontothecorresponding
connectors.
4.Ifapplicable,engageanylockingmechanismtoensureasecureconnection.
38