Quick Start
4
Table 4.1 Actions that can be performed from the SCAN and HOLD modes.
ACTION SCAN
MODE
HOLD
MODE
Short press LOG to store the current reading (Section 10). YES YES
Short press MODE to step through the MAX, MIN, AVG, DIF
readings (Section 7.4).
When a thermocouple is connected, the MAX, MIN, AVG, and
DIF readings are not available.
YES YES
Long press LOG to switch the worklights on or off. YES YES
Long press MODE to access the programming menu (Section 9). NO YES
Short press an arrow button to view manually logged readings.
Use the arrows to then scroll through logged readings.
To view readings stored using the Auto Interval mode, refer to
Section 10.
NO YES
#NAS100131; r. AC/92852/92852; en-US
5
To Next Page
Loading...
